N-Ex Mini
Light Duty Extractor
The N-EX Mini is a highly compact fume extraction system built for light duty laser engraving and coding applications. Ideal for the N-Lase Desktop and lower power laser solutions.

Features: |
Pre FilterDeepPleat Duo |
HEPAFilter |
ACFAdvanced Carbon Filter |
Compact
Extra Small
Providing great basic fume extraction and allowing you to maintain safe operator working conditions, the N-EX Mini features three stage filtration alongside a condition indicator as standard. The DeepPleat pre filter, HEPA and a chemical section enables you to remove 99.997% of particles 0.3 micron in size.
Suitable for use with the N-Lase Desktop systems, the N-EX Mini is manufactured by BOFA to extremely high standards.
Surecheck
Quality Standard
.webp)
Enquire about the n-Ex mini
Specification
Standard Technical Details
System Weight |
24 kg |
Cabinet Construction |
Brushed stainless steel / powder coated mild steel |
Airflow / Pressure |
180m³/hr / 30mbar |
Electrical Data |
230v 1ph 50/60Hz Full load current: 0.9 amps / 135 watts |
Noise level |
<61dBA (at typical operating speed) |
DeepPleat DUO Surface media area |
1.74m² approx (18.7 ft²) |
Combined Filter Efficiency |
99.997% @ 0.3 microns |
Treated activated carbon |
7kgs approx (15.4 lbs) |
Dimensions
System Drawings
- Unit / Filter condition display
- On/off switch
- Filter compartment latch
- Hose inlet connection – 50mm
- Signal / Interface cable
- Power cable inlet
- Motor cooling inlet
- Exhaust outlet
